Diplexer question
  
STVTalk.com Forum Index
STVTalk.com
All about Satellite TV systems.
 
 FAQFAQ   MemberlistMemberlist     RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
   
Google
 
Web stvtalk.com
Diplexer question

 
Post new topic   Reply to topic    STVTalk.com Forum Index -> Satellite TV
Author Message
blitz
Guest





Posted: Sun Oct 23, 2005 12:08 am    Post subject: Diplexer question Reply with quote

DirecTV triple dish, local channels.

Two 2-wire cables down from the dish, doesn't look there's a diplexer
anywhere in the system.

Three receivers, two of them Ultimate TV. Two cables to one of the
Ultimate TV receivers. Can I use a diplexer to get a second cable to
the second Ultimate TV?

I have a Terk BMS-34 (2 sat and one on-air antenna in, 4 out). Would
this one work?
Back to top
Billy Ryman
Guest





Posted: Mon Oct 24, 2005 6:28 am    Post subject: Re: Diplexer question Reply with quote

On the Terk BMS 34 the cable or antenna input is the center input on the top
of the multi-switch. Those signals will carry through the 4 outputs (bottom)
on RG-6 coax, but you need a diplexor to split the signal when you get to
the TV set. The diplexor is a separate animal from the muti-switch.
Back to top
blitz
Guest





Posted: Tue Oct 25, 2005 11:19 pm    Post subject: Re: Diplexer question Reply with quote

Billy Ryman writes:

Quote:
On the Terk BMS 34 the cable or antenna input is the center input on the top
of the multi-switch. Those signals will carry through the 4 outputs (bottom)
on RG-6 coax, but you need a diplexor to split the signal when you get to
the TV set. The diplexor is a separate animal from the muti-switch.


Okay, thanks. I figured out I need a 4x8 or 5x8 multi-switch (then
diplexors, if I go to a separate on-air antenna (which I probably
will, since trees often block reception of local channels from DTV).
Back to top
hard69rock



Joined: 28 Nov 2005
Posts: 22
Location: Texas

Posted: Mon Nov 28, 2005 4:27 am    Post subject: Diplexer Reply with quote

The switch for the system is built into the LNB assembly. You should run a line from the LNB to a ground block to the new receiver. A diplexer or 3x4 switch will cause problems.
I have removed many a switch from a triple LNB system that had serious problems for the customer.
_________________
Rock and roll is like sex, if the neighbors can't hear it- why bother?
Back to top
View user's profile Send private message Send e-mail Yahoo Messenger
 
Post new topic   Reply to topic    STVTalk.com Forum Index -> Satellite TV All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



FPGA Electronics Hardware and Peripherals Auto Forum
New Topics Powered by phpBB