diagonal lines
  
STVTalk.com Forum Index
 STVTalk.com
All about Satellite TV systems.
 
 FAQFAQ   MemberlistMemberlist     RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
   
Google
 
Web stvtalk.com
diagonal lines

 
Post new topic   Reply to topic    STVTalk.com Forum Index -> Television Receive-Only (TVRO)
Author Message
heils
Guest
Posted: Fri Nov 04, 2005 11:54 pm    Post subject: diagonal lines Reply with quote
Tried to install new C Ku feedhorn but couldn't use it. After putting the
old one (C only) back on we now get diagonal lines floating across picture.
Any hints as to what it could be?
Back to top
SAC 441
Guest
Posted: Sat Nov 05, 2005 1:06 am    Post subject: Re: diagonal lines Reply with quote
Diagonal lines sometimes are indicative of "bleedover" interference from
some source crossing over a pair of connections.When you first installed
the C/Ku LNB you had 2 separate connects ONE to the C-Band and ONE to
the Ku-Band terminals on the back of your receiver EVEN if you have a
dual feedhorn setup.
Now,when you went back to C-Band only,did you disconnect the Ku-Band
wires FROM THE BACK OF THE RECEIVER? Frequency "slop" could occur if
your receiver "thinks" it has a dual frequency band connection and only
one frequency band is available.I am not saying this is your problem,but
I thought I would suggest it.
Back to top
heils
Guest
Posted: Sat Nov 05, 2005 5:08 pm    Post subject: Re: diagonal lines Reply with quote
Thank you. I had disconnected the wire but had't reset the receiver options.
It is back to the quality I had before I started all this! Mary
"SAC 441" <SAC441@webtv.net> wrote in message
news:23747-436BB128-337@storefull-3257.bay.webtv.net...
Quote:
Diagonal lines sometimes are indicative of "bleedover" interference from
some source crossing over a pair of connections.When you first installed
the C/Ku LNB you had 2 separate connects ONE to the C-Band and ONE to
the Ku-Band terminals on the back of your receiver EVEN if you have a
dual feedhorn setup.
Now,when you went back to C-Band only,did you disconnect the Ku-Band
wires FROM THE BACK OF THE RECEIVER? Frequency "slop" could occur if
your receiver "thinks" it has a dual frequency band connection and only
one frequency band is available.I am not saying this is your problem,but
I thought I would suggest it.
Back to top
 
Post new topic   Reply to topic    STVTalk.com Forum Index -> Television Receive-Only (TVRO) All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



FPGA Electronics Hardware and Peripherals Auto Forum
New Topics Powered by phpBB