STVTalk.com

Jay · Guest

My 4DTV receiver was giving me some problems so I decided to do a
factory reset which I have done before with no problems. When I go to
call 1-800-500-9268 the CSR told me I had to order programming to get a
rehit to get the time an sats back. I dont have the money right now to
order any programming and now i'm stuck with the wrong time on my
receiver and not enough satellites to program in. Is there anything I
can do to get my receiver back up to normal operations or am I out of
luck till I buy programming? I'm really only interested in the free
stuff. I was mostly using the 4DTV to move my dish so I could watch the
the FTA mpeg2 feeds. If I have to pay to use my $400 reciever i'll just
sell it and get me a regular dish mover and forget about anything 4DTV.
Personally I liked my Uniden receiver much better than this one. Thanks
for any help.

DRLev · Guest

The satellite maps should load without the provider doing anything. You do not need a
rehit for those. They will load from Galaxy 10 transponder 7. If you have a 920 there
will be no G0 icon in the default maps so use G9 at the galaxy 10 position.

If you call NPS they may be willing to correct the time, but I can make no promises.
www.callnps.com

"Jay" <news12312005@jaygroh.com> wrote in message
news:S4-dnXl6sqf0IKHfRVn-sg@adelphia.com...
| My 4DTV receiver was giving me some problems so I decided to do a
| factory reset which I have done before with no problems. When I go to
| call 1-800-500-9268 the CSR told me I had to order programming to get a
| rehit to get the time an sats back. I dont have the money right now to
| order any programming and now i'm stuck with the wrong time on my
| receiver and not enough satellites to program in. Is there anything I
| can do to get my receiver back up to normal operations or am I out of
| luck till I buy programming? I'm really only interested in the free
| stuff. I was mostly using the 4DTV to move my dish so I could watch the
| the FTA mpeg2 feeds. If I have to pay to use my $400 reciever i'll just
| sell it and get me a regular dish mover and forget about anything 4DTV.
| Personally I liked my Uniden receiver much better than this one. Thanks
| for any help.

Jay · Guest

I just gave them a call. I'm pretty much screwed on getting the time
fixed unless I shell out some money for programming. Which programming
is cheap but I do have cable and dont need any of the paid service on
the big dish. I can live with the time being wrong for now. As far as
the sat maps go is G0-7 a DC channel? If so its not showing up as one on
my receiver. and how long does it usually take to download the maps?
Should I leave the receiver on or have it off? I've had this receiver
for a few months now and i'm still kind of new to it. Thanks for your
quick reply.

DRLev wrote:

Jay · Guest

Well it looks like i'll have to adjust my sat then. my quality is 1 on
that transponder and signal is 100 and jumping to 10 every few sec. G0-5
is getting quality of 66. The thing is I wasnt having signal problems
before I did this. If I can get this back working i'm not going to mess
with it again and if I have any more problems i'll just get my good old
analog receiver back out. I never had this many problems with my old
one. Thanks for your help.

DRLev wrote:

DRLev · Guest

Transponder 7 is the base transponder for the TVN channels. It is digital, but it will
have no audio or video.

It doesn't matter if the receiver is on or off. The maps will download if the receiver
gets a digital lock.

"Jay" <news12312005@jaygroh.com> wrote in message
news:ipKdnY87YOCSWKHfRVn-1w@adelphia.com...
|I just gave them a call. I'm pretty much screwed on getting the time
| fixed unless I shell out some money for programming. Which programming
| is cheap but I do have cable and dont need any of the paid service on
| the big dish. I can live with the time being wrong for now. As far as
| the sat maps go is G0-7 a DC channel? If so its not showing up as one on
| my receiver. and how long does it usually take to download the maps?
| Should I leave the receiver on or have it off? I've had this receiver
| for a few months now and i'm still kind of new to it. Thanks for your
| quick reply.
|
|
| DRLev wrote:
| > The satellite maps should load without the provider doing anything. You do not
need a
| > rehit for those. They will load from Galaxy 10 transponder 7. If you have a 920
there
| > will be no G0 icon in the default maps so use G9 at the galaxy 10 position.
| >
| > If you call NPS they may be willing to correct the time, but I can make no
promises.
| > www.callnps.com
| >
| >
| >
| >
| >
| > "Jay" <news12312005@jaygroh.com> wrote in message
| > news:S4-dnXl6sqf0IKHfRVn-sg@adelphia.com...
| > | My 4DTV receiver was giving me some problems so I decided to do a
| > | factory reset which I have done before with no problems. When I go to
| > | call 1-800-500-9268 the CSR told me I had to order programming to get a
| > | rehit to get the time an sats back. I dont have the money right now to
| > | order any programming and now i'm stuck with the wrong time on my
| > | receiver and not enough satellites to program in. Is there anything I
| > | can do to get my receiver back up to normal operations or am I out of
| > | luck till I buy programming? I'm really only interested in the free
| > | stuff. I was mostly using the 4DTV to move my dish so I could watch the
| > | the FTA mpeg2 feeds. If I have to pay to use my $400 reciever i'll just
| > | sell it and get me a regular dish mover and forget about anything 4DTV.
| > | Personally I liked my Uniden receiver much better than this one. Thanks
| > | for any help.
| >
| >

	STVTalk.com Forum Index -> Television Receive-Only (TVRO)	All times are GMT
Page 1 of 1